Another short ipexpert ccie voice lab review

Current ipexpert ccie voice lab News

Matching calling party with Attendant DN

Thu, 20 Jul 2006 01:20:43 +0000
If an Attendant DN is configured on FXO port and this parameter is set to True, then Callmanager will limit outbound calls from that DN to only use the FXO port that is configured with that Attendant DN. You would need to create a route pattern and include this FXO port in the route list. ...]

Why CUE integration with CCM doesn’t need MWI numbers?

Thu, 20 Jul 2006 14:38:00 +0000
Since Cisco Unity Express uses JTAPI to interface with the Cisco CallManager, no MWI on and off numbers need be configured.

Pingback from Who was the first CCIE? « #sh ip route vrf CCIE

What’s The Deal With RIP Triggered Extensions?!

Mon, 27 Oct 2008 20:57:23 +0000
So I am labbing away last night on RIPv2. I come across a task in the IPX Volume 1 workbook to configure 2 routers connected via p2p serial interfaces for triggered updates…OK no problem. I configure the commands, but never see the correct validation under the show command. If anybody can explain ...]

PacketTrap Perspective network management - now support VMware Virtualization

Fri, 31 Oct 2008 14:31:56 +0000
I attended a webinar put on by PacketTrap network management this week. I was interested to see one of their latest features of their network management system - Perspective. The new feature is VMware Virtualization support.It works like this - PacketTrap uses SNMP to talk to each VMware ESX host system, pulling back statistics on ...]

Major Announcement From Internetwork Expert Coming Early Next Week

Fri, 24 Oct 2008 20:16:01 +0000
Brian updated his post today which has a very interesting update… Kind of glad I have my full E2E program…
Update: A few people have asked if they should wait to make a purchase until after the announcement. The answer is no. You actually have an advantage if you purchase before the ...]

Create your own blog

“Variance” - Understanding The Balancing Act

Wed, 17 Sep 2008 21:50:20 +0000
This is an extract from a comment left by a visitor to a previous post on this blog:



“i was going through the bsci section and found about load balancing …

i set up a network in gns3 and tested loadbalancing with bandwidth and variance command
what exactly is the difference between those two ? both ...]


ccie lab blueprint
ccie lab book
ccie lab books
ccie lab boot camp
cisco ccnp tests | cisco ccnp track | cisco ccnp training | cisco ccnp video